ABS Novodur® Novodur Ultra 4000PG

Properties:
Heat resistance
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Mold shrinkage rate		ISO 294-4	0.50-0.80 %
Mold shrinkage rate	Mold shrinkage rate		ISO 294-4	0.50-0.80 %

Basic performance	Test Condition	Test Method	Test Result
density		ISO 1183	1.05 g/cm
		ISO 1133	7.00 CM

Mechanical properties	Test Condition	Test Method	Test Result
yield strain		ISO 527-1,-2/50	3.1 %
fracture strain		ISO 527-1,-2/50	15 %
Flexural modulus		ISO 178	2350 Mpa
bending strength		ISO 178	73.0 Mpa
Charpy notch impact strength		ISO 179/1eA	10.00 KJ/m
Charpy notch impact strength	Charpy notch impact strength		ISO 179/1eA	20.0 KJ/m
Tensile modulus		ISO 527-1,-2/1	2400 Mpa
yield stress		ISO 527-1,-2/50	46.0 Mpa
IZOD notch impact strength		ISO 180/1A	10.00 KJ/m
IZOD notch impact strength	IZOD notch impact strength		ISO 180/1A	23.0 KJ/m
hardness		ISO 2039-1	100.0 Mpa

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	1E+16 ohms
Volume resistivity		IEC 60093	1E+16 ohm.cm
		IEC 60250	3.00
			IEC 60250	2.90
Dielectric loss factor		IEC 60250	0.00630
Dielectric loss factor	Dielectric loss factor		IEC 60250	0.00870
electric strength		IEC 60243-1	38 KV/mm

Thermal performance	Test Method	Test Result
combustibility	UL 94	HB
	ISO 75B-1,-2	103 °C
		ISO 75A-1,-2	98.0 °C
vicat	ISO 306	107 °C
	ISO 11359-1,-2	0.000090 cm/cm℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top