AS(SAN) 388S INEOS STYRO THAILAND

Form：Granules | Grade：Injection grade

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index			18	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	220℃/10kg		7	CM
Water absorption rate			0.3	%
density			1080	kg/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30℃		19	KJ/m
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23℃		2.5	KJ/m
Tensile modulus			3900	Mpa
tensile strength	Break		84	Mpa
Tensile fracture elongation			4	%
Tensile modulus	1h		3500	Mpa
Tensile modulus	Tensile modulus	1000h		2800	Mpa
Charpy Notched Impact Strength	23℃		21	KJ/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPa		99	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa		103	°C
Vicat softening temperature	50℃/H50n		107	°C
Linear coefficient of thermal expansion	Flow		0.7	E-4/℃
Combustibility	1.6mm	UL 94	HB
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	100Hz		3
Dielectric constant	Dielectric constant	1MHz		2.8
Dissipation factor	100Hz		50	E-4
Dissipation factor	Dissipation factor	1MHz		80	E-4
Volume resistivity			>1E13	Ω.m
Surface resistivity			>1E15	Ω
Dielectric strength			34	KV/mm
Compared to the Leakage Traceability Index (CTI)			475

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top