PLA Ingeo™ 3100HP NATUREWORKS USA
78
- Properties:Updatable resourcesModerate liquidityFood contact complianceMedium viscosity
- Usages:chipMakeup productsCupsElectrical enclosurebuilding materialscurrency
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 24 g/10min | |
| Shrinkage rate | 1.7-1.8 % | ||
| 0.20-0.40 % | |||
| relative viscosity | ASTM D5225 | 3.1 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transparency | Opaque | ||
| Transparent |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 64.1 Mpa | |
| ASTM D638 | 64.8 Mpa | ||
| elongation | ASTM D638 | 2.2 % | |
| ASTM D638 | 3.4 % | ||
| Flexural modulus | ASTM D790 | 4360 Mpa | |
| ASTM D790 | 3590 Mpa | ||
| bending strength | ASTM D790 | 108 Mpa | |
| ASTM D790 | 112 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTME2092 | 149 °C | |
| ASTME2092 | 54.0 °C | ||
| ASTME2092 | 165to180 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top