Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.29 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.50 % |
| Water absorption rate | | ASTMD570 | 0.20 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTMD785 | 114 |
| | ASTMD2240 | 83 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 4140 MPa |
| tensile strength | Yield | ASTMD638 | 65.5 MPa |
| elongation | Break | ASTMD638 | 8.0 % |
| Flexural modulus | | ASTMD790 | 3100 MPa |
| bending strength | Yield | ASTMD790 | 103 MPa |
| compressive strength | | ASTMD695 | 48.3 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 69 J/m |
| Suspended wall beam without notch impact strength | | ASTMD4812 | 430 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+11 ohms·cm |
| dielectric strength | | ASTMD149 | 18 kV/mm |
| dielectric constant | | ASTMD150 | 5.00 |
| Dissipation Factor | | ASTMD150 | 0.011 |
| arc resistance | | ASTMD495 | 90.0 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 104 °C |
| | ASTMD648 | 65.6 °C |
| | ASTMD696 | 1.3E-04 cm/cm/°C |
| thermal conductivity | | ASTMC177 | 0.26 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare