PPS FZ-3600-R5 DIC JAPAN

Form：Granules | Grade：Injection grade

Properties:

High temperature resistanenhanceGlass fiber reinforcedfillingFiller: Glass mineral

Typical Applications:

Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Household appliances \| Household appliances \| Automotive sector
Properties:	High temperature resistan \| enhance \| Glass fiber reinforced \| filling \| Filler: Glass mineral

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength		ASTM D256	320	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D790	17500	Mpa
Elongation at Break		ASTM D790	1.5	%
Friction coefficient	Steel - Static	ASTM D1894	0.35
Friction coefficient	Friction coefficient	Steel - Dynamic	ASTM D1894	0.35
Poisson's ratio			0.34
compressive strength		ASTM D695	170	Mpa
bending strength		ASTM D790	230	Mpa
elongation	Break	ASTM D638	1.0	%
tensile strength		ASTM D638	150	Mpa
Tensile modulus		ASTM D638	18500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD:-30to90°C	ASTM D696	1.7E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD:-30to90°C	ASTM D696	1.7E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	265	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ASTM D570	0.020	%
Shrinkage rate	TD	ASTM D955	1.0	%
Shrinkage rate	Shrinkage rate	MD	ASTM D955	0.25	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ASTM D495	180	sec
Dissipation factor	1MHz	ASTM D150	8E-03
Dielectric constant	1MHz	ASTM D150	5.00
Dielectric strength	1.60mm	ASTM D149	16	KV/mm
Volume resistivity		ASTM D257	1E+16	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	121
Rockwell hardness	Rockwell hardness	M-Scale	ASTM D785	100

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top