
PBT 3100H-EF2001 JAPAN POLYPLASTIC
84
Form:Granules | Grade:Enhanced level
Properties:
Glass fiber reinforcedThermal stability7.5%GFFiller: Glass fiber reinfFiller by weight
Typical Applications:
Electronic and electrical componentsAutomotive Applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and electrical components | Automotive Applications |
| Properties: | Glass fiber reinforced | Thermal stability | 7.5%GF | Filler: Glass fiber reinf | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | ASTM D527-1 | 81 | Mpa | |
| Tensile strain | Break | ASTM D527-1 | 4.0 | % |
| bending strength | ASTM D178 | 135 | Mpa | |
| Bending modulus | ASTM D178 | 3830 | Mpa | |
| Charpy Notched Impact Strength | ASTM D179/1eA | 4.0 | kJ/m² | |
| tensile strength | ISO 527-2 | 81.0 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 4.0 | % |
| Bending modulus | ISO 178 | 3830 | Mpa | |
| bending strength | ISO 178 | 135 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | HDT | ASTM D75-1 | 199 | °C |
| UL flame retardant rating | UL 94 | HB | ||
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 199 | °C |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 6E-05 | cm/cm/°C |
| TD:23to55°C | Internal Method | 1E-04 | cm/cm/°C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.00mm | IEC 60243-1 | 17 | KV/mm |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Scale | ISO 2039-2 | 90 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| ColourNumber | EF2001/ED3002 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.