
HIPS PH-888G ZHENJIANG CHIMEI
530
Form:Granules | Grade:Impact resistant grade
Properties:
High impact resistanceheat-resistingHigh gloss
Typical Applications:
ShellHome appliance componentsElectronic fieldElectrical field
Product Description
Certificates(3)
Datasheet
Product Description
| Typical Applications: | Shell | Home appliance components | Electronic field | Electrical field |
| Properties: | High impact resistance | heat-resisting | High gloss |
Certificates


Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| tensile strength | 23°C | ISO 527-2 | 28 | Mpa |
| Elongation at Break | 23°C | ISO 527-2 | 50 | % |
| bending strength | 23°C | ISO 178 | 45 | Mpa |
| Bending modulus | 23°C | ISO 178 | 1400 | Mpa |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 | kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 100 | kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 9.00 | kJ/m² |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ISO 306/B50 | 91 | °C | |
| Hot deformation temperature | 1.80MPaAnnealed | ISO 75-2/A | 95 | °C |
| 1.80MPaAnnealed | ISO 75-2/Af | 79 | °C | |
| Vicat softening temperature | ISO 306/A50 | 100 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.05 | g/cm³ | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | ISO 2039-1 | 93 | Mpa | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | HB | 1.50mm | |
| UL -94 | HB | 3.00mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.