PPSU RADEL® P-1700NT11 SOLVAY USA
108
- Properties:Resistance to stress cracThermal stabilityHigh impact resistance
- Usages:Medical devicesElectrical applicationshousehold electrical appl
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ASTMD792 | 1.24 | g/cm³ | |
| Melt mass flow rate | 343°C/2.16kg | ASTMD1238 | 6.5 | g/10min |
| Shrinkage rate | MD | ASTMD955 | 0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.30 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ASTMD638 | 2480 | Mpa | |
| tensile strength | ASTMD638 | 70.3 | Mpa | |
| elongation | 断裂 | ASTMD638 | 50to100 | % |
| Bending modulus | ASTMD790 | 2690 | Mpa | |
| bending strength | ASTMD790 | 106 | Mpa | |
| Impact strength of cantilever beam gap | ASTMD256 | 69 | J/m | |
| Tensile impact strength | ASTMD1822 | 420 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 174 | °C |
| Linear coefficient of thermal expansion | MD | ASTMD696 | 5.6E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | ASTMD257 | 3E+16 | ohms·cm | |
| Dielectric strength | ASTMD149 | 17 | KV/mm | |
| Dielectric constant | 60Hz | ASTMD150 | 3.03 | |
| 1kHz | ASTMD150 | 3.04 | ||
| 1MHz | ASTMD150 | 3.02 | ||
| Dissipation factor | 60Hz | ASTMD150 | 7E-04 | |
| 1kHz | ASTMD150 | 1E-03 | ||
| 1MHz | ASTMD150 | 6E-03 |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.5mm,ALL | UL94 | HB | |
| 4.5mm,NC | UL94 | V-0 | ||
| Burning wire flammability index | 0.8mm | IEC60695-2-12 | 850 | °C |
| 1.6to6.0mm | IEC60695-2-12 | 960 | °C | |
| Hot filament ignition temperature | 0.8mm | IEC60695-2-13 | 875 | °C |
| 1.6to6.0mm | IEC60695-2-13 | 850 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top