PA66 VITAMIDE® AR16GY6081
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792,ISO1183 | 1.37 g/cm³ | |
| Shrinkage rate | 内部方法 | 0.40 % | |
| Water absorption rate | ASTMD570,ISO62 | 0.80 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTMD638,ISO527-2 | 165 MPa |
| elongation | Break | ASTMD638,ISO527-2 | 3.5 % |
| Flexural modulus | ASTMD790,ISO178 | 8200 MPa | |
| bending strength | ASTMD790,ISO178 | 260 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179 | 11 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| CTI | ASTMD3638 | 450 V | |
| dielectric strength | ASTMD149,IEC60243-1 | 34 kV/mm | |
| CTI | IEC60112 | 450 V | |
| Volume resistivity | ASTMD257,IEC60093 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTMD648,ISO75-2/B | 253 °C | |
| ASTMD648,ISO75-2/A | 248 °C | ||
| melting temperature | ISO1218,ASTMD2117 | 255 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top