Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.30 g/cm³ |
| Shrinkage rate | | | 1.2 % |
| Water absorption rate | | ISO62 | 0.50 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 99 |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|
| MeltViscosity | | 内部方法 | 0.440 kPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| shear modulus | | ISO15310 | 1150 MPa |
| shear strength | | ASTMD732 | 90.0 MPa |
| Poisson's ratio | | ASTMD638 | 0.36 |
| Tensile stress | Yield | ISO527-2 | 100 MPa |
| Tensile stress | | ISO527-2 | 115 MPa |
| Tensile strain | Break | ISO527-2 | 40 % |
| Tensile strain | | ISO527-2 | 20 % |
| Flexural modulus | | ISO178 | 4100 MPa |
| Flexural modulus | | ISO178 | 4000 MPa |
| Bending stress | | ISO178 | 165 MPa |
| Bending stress | | ISO178 | 170 MPa |
| compression stress | | ISO604 | 135 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180 | 7.5 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180 | 4.7 kJ/m² |
| | ISO180 | 无断裂 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD696 | 4.7E-05 cm/cm/°C |
| | ASTMD696 | 1.1E-04 cm/cm/°C |
| RTI Elec | | UL746 | 260 °C |
| RTI Imp | | UL746 | 260 °C |
| RTI | | UL746 | 260 °C |
| melting temperature | | | 340 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare