PC 505R SABIC INNOVATIVE US

Form：Granules | Grade：Injection grade

Properties:

Middle flowThermal stability

Typical Applications:

Lighting applicationsPlastic bag

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Lighting applications \| Plastic bag
Properties:	Middle flow \| Thermal stability

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C9	ISO 179/1eA	9.0	kJ/m²
	Charpy Notched Impact Strength	23°C8	ISO 179/1eA	10	kJ/m²
	Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/2C	15	kJ/m²
Impact strength of simply supported beam without notch	-30°C9	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C8	ISO 179/1eU	NoBreak
Charpy Notched Impact Strength	-30°C8	ISO 179/1eA	9.0	kJ/m²
Suspended wall beam without notch impact strength	-30°C11	ISO 180/1U	130	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	-30°C10	ISO 180/1U	NoBreak
Impact strength of cantilever beam gap	23°C	ASTM D4812	1600	J/m
	Impact strength of cantilever beam gap	23°C10	ISO 180/1A	8.0	kJ/m²
		Impact strength of cantilever beam gap	23°C11	ISO 180/1A	10	kJ/m²
			Impact strength of cantilever beam gap	-30°C11	ISO 180/1A	8.0	kJ/m²
				Impact strength of cantilever beam gap	-30°C10	ISO 180/1A	8.0	kJ/m²
					Impact strength of cantilever beam gap	23°C	ASTM D256	110	J/m
					Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ASTM D256	80	J/m
Impact strength of simply supported beam without notch	23°C8	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C9	ISO 179/1eU	NoBreak
Suspended wall beam without notch impact strength	23°C11	ISO 180/1U	NoBreak
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C10	ISO 180/1U	NoBreak
Dart impact	23°C,TotalEnergy	ASTM D3763	61.0	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	5VA
Burning wire flammability index	1.0mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.0mm	IEC 60695-2-13	825	°C
Extreme Oxygen Index		ISO 4589-2	37	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	1000Cycles,1000g,CS-17Wheel	Internal Method	11.0	mg
bending strength	Break,50.0mmSpan	ASTM D790	108	Mpa
bending strength	bending strength		ISO 178	95.0	Mpa
Tensile modulus		ISO 527-2/1	3300	Mpa
Tensile modulus	Tensile modulus		ASTM D638	3930	Mpa
tensile strength	Yield	ASTM D638	63.0	Mpa
	tensile strength	Yield	ISO 527-2/5	60.0	Mpa
		tensile strength	Break	ASTM D638	48.0	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/5	45.0	Mpa
elongation	Yield	ASTM D638	3.0	%
Tensile strain	Yield	ISO 527-2/5	5.0	%
elongation	Break	ASTM D638	12	%
Tensile strain	Break	ISO 527-2/5	7.0	%
Bending modulus	50.0mmSpan	ASTM D790	3530	Mpa
Bending modulus	Bending modulus		ISO 178	3400	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	--	ISO 306/B50	141	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	143	°C
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	4.7E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：23to80°C	ISO 11359-2	4E-05	cm/cm/°C
		Linear coefficient of thermal expansion	TD：-40to40°C	ASTME831	8.5E-05	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：23to80°C	ISO 11359-2	7E-05	cm/cm/°C
thermal conductivity		ISO 8302	0.21	W/m/K
RTI Elec		UL 746	130	°C
RTI Imp		UL 746	130	°C
Hot deformation temperature	0.45MPa,Unannealed,3.20mm	ASTM D648	143	°C
	Hot deformation temperature	0.45MPa,Unannealed,100mmSpan	ISO 75-2/Be	144	°C
		Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	138	°C
			Hot deformation temperature	1.8MPa,Unannealed,100mmSpan	ISO 75-2/Ae	136	°C
			Hot deformation temperature	Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/Ae	136	°C
Vicat softening temperature		ASTM D152514	149	°C
RTI Str		UL 746	130	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.13	%
Water absorption rate	Water absorption rate	Saturation,23°C	ISO 62	0.31	%
Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
Shrinkage rate	Shrinkage rate	MD：--2	Internal Method	0.20-0.60	%
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	7.00	cm3/10min
melt mass-flow rate	300°C/1.2kg	ASTM D1238	7.0	g/10min
density		ISO 1183	1.25	g/cm³
density	density		ASTM D792	1.26	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	60Hz	IEC 60250	1E-03
	Dissipation factor	1MHz	IEC 60250	0.010
	Dissipation factor	Dissipation factor	50Hz	IEC 60250	1E-03
Surface resistivity		IEC 60093	>1.0E+15	ohms
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Dielectric strength	0.800mm,in Oil	IEC 60243-1	33	KV/mm
	Dielectric strength	1.60mm,in Oil	IEC 60243-1	25	KV/mm
	Dielectric strength	Dielectric strength	3.20mm,in Oil	IEC 60243-1	16	KV/mm
Relative permittivity	50Hz	IEC 60250	2.90
	Relative permittivity	60Hz	IEC 60250	2.90
	Relative permittivity	Relative permittivity	1MHz	IEC 60250	2.80
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test	H358/30	ISO 2039-1	115	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top