LLDPE SABIC® 218W
879
- Properties:High slidingHigh gloss
- Usages:film
- Certificates:FDA
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D-2457 | 60 | |
| Haze ratio | ASTM D-1003 | 15 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 2.0 g/10min | |
| density | ASTM D-792 | 0.918 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at break | ASTM D-882 | 700 % | |
| ASTM D-882 | 750 % | ||
| Puncture Resistance | SABIC | 63 J/mm | |
| Dart impact | ASTM D-1709 | 110 g | |
| Secant modulus | ASTM D-882 | 220 Mpa | |
| ASTM D-882 | 260 Mpa | ||
| tear strength | ASTM D-1922 | 135 g | |
| ASTM D-1922 | 400 g | ||
| tensile strength | ASTM D-882 | 35 Mpa | |
| ASTM D-882 | 59 Mpa | ||
| ASTM D-882 | 12 Mpa | ||
| ASTM D-882 | 10 Mpa | ||
| elongation at break | ASTM D638/ISO 527 | 750 % | |
| tensile strength | ASTM D638/ISO 527 | 59 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 10 kg/cm²(MPa)[Lb/in²] |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 0.918 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 2.0 g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top