Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Ash Content | | ISO3451 | 20 % |
| density | | ISO1183 | 1.28 g/cm³ |
| Shrinkage rate | | | 0.40 % |
| Water absorption rate | | ISO62 | 2.1 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 85 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Burning wire flammability index | | IEC60695-2-12 | 650 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2 | 150 MPa |
| Tensile stress | Break | ISO527-2 | 147 MPa |
| Tensile strain | Yield | ISO527-2 | 3.0 % |
| Tensile strain | Break | ISO527-2 | 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/A | 8.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | 500 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/Be | 260 °C |
| vicat | | ISO306/B120 | 255 °C |
| melting temperature | | | 260到265 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare