PA6 UTN121 TORAY SHENZHEN

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedType: Nylon 6 base tough

Typical Applications:

Electrical fieldElectronic field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field
Properties:	Glass fiber reinforced \| Type: Nylon 6 base tough

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23℃，24hr	ASTM D-570	无水｜1.8	%
Water absorption rate	Water absorption rate	23℃，24hr	ASTM D-570	2.8%水｜-	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23℃，Yield	ASTM D-638	无水｜600	kg/cm2
Impact strength of cantilever beam gap	23℃，Unnotched1/8		2.8%水｜-	kg·cm/cm2
Elongation at Break	23℃	ASTM D-638	无水｜<200	%
Elongation at Break	Elongation at Break	23℃	ASTM D-638	2.8%水｜<200	%
bending strength	23℃	ASTM D-790	无水｜780	kg/cm2
bending strength	bending strength	23℃	ASTM D-790	2.8%水｜360	kg/cm2
Impact strength of cantilever beam gap	V-Notched1/2，23℃	ASTM D-256	无水｜20	kg·cm/cm
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	V-Notched1/2，23℃	ASTM D-256	2.8%水｜72	kg·cm/cm
tensile strength	23℃，Yield	ASTM D-638	2.8%水｜360	kg/cm2
Impact strength of cantilever beam gap	-40℃，Unnotched1/2	ASTM D-256	无水｜18	kg·cm/cm
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-40℃，Unnotched1/2	ASTM D-256	2.8%水｜-	kg·cm/cm
Taber abraser	1000g,CS-17	ASTM D-1044	无水｜6-7	mg/1000次
Taber abraser	Taber abraser	1000g,CS-17	ASTM D-1044	2.8%水｜-	mg/1000次
Bending modulus	23℃	ASTM D-790	无水｜20000	kg/cm2
Bending modulus	Bending modulus	23℃	ASTM D-790	2.8%水｜8000	kg/cm2
Rockwell hardness	23℃	ASTM D-785	无水｜114	R-标度
Rockwell hardness	Rockwell hardness	23℃	ASTM D-785	2.8%水｜-	R-标度
Impact strength of cantilever beam gap	23℃，Unnotched1/8		无水｜无裂断	kg·cm/cm2
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL-94 flame retardant grade	1.57mm	UL 94	无水｜HB
UL-94 flame retardant grade	UL-94 flame retardant grade	1.57mm	UL 94	2.8%水｜-
Melting temperature		差示扫描测热计DSC	225	°C
Hot deformation temperature	4.6kg/cm2	ASTM D-648	无水｜160	°C
Hot deformation temperature	Hot deformation temperature	4.6kg/cm2	ASTM D-648	2.8%水｜-	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	无水｜1.09
density	density		ASTM D-792	2.8%水｜-

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top