PA12 2533 SA01 MED ARKEMA FRANCE

Form：Granules | Grade：Medical grade

Properties:

Low wear

Typical Applications:

Medical and nursing supplies

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Medical and nursing supplies
Properties:	Low wear

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	12.0	Mpa
tensile strength	Break	ISO 527-2	32.0	Mpa
	tensile strength	10% Strain	ISO 527-2	1.00	Mpa
		tensile strength	50% Strain	ISO 527-2	3.00	Mpa
			tensile strength	100% Strain	ISO 527-2	4.00	Mpa
			tensile strength	tensile strength	300% Strain	ISO 527-2	5.00	Mpa
Tensile strain	Break	ISO 527-2	> 50 > 300	%
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			55 to 65	°C
drying time			4.0 to 8.0	hr
Processing (melt) temperature			180 to 240	°C
Mold temperature			10 to 30	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306/B50	58.0	°C
Melting temperature		ISO 11357-3	134	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	0.80	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.50	%
Water absorption rate	Saturation, 23°C	ISO 62	1.2	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.40	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore A, 3 Sec	ISO 7619-1	77
Shore hardness	Shore hardness	Shore D, 15 Sec	ISO 7619-1	22

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top