NBR NANCAR® 1051 Nantex Industry Co., Ltd.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	300%Strain3	ASTM D412	12.6	MPa
	tensile strength	300%Strain4	ASTM D412	13.9	MPa
		tensile strength	300%Strain5	ASTM D412	15.3	MPa
			tensile strength	Yield3	ASTM D412	27.5	MPa
				tensile strength	Yield4	ASTM D412	27.9	MPa
				tensile strength	tensile strength	Yield5	ASTM D412	28.2	MPa
elongation	Break3	ASTM D412	580	%
	elongation	Break4	ASTM D412	530	%
	elongation	elongation	Break5	ASTM D412	510	%
tear strength		ASTM D624	58.0	kN/m
Permanent compression deformation	100°C,70hr	ASTM D395	54	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Heat loss		ASTM D5688	0.40	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
stabilizer			Non-staining
Soluble inMEK			100	%
viscosity	Minimum	ASTM D1646	63.0
	viscosity	Minutesto35pointsrise,t35	ASTM D1646	38.6	min
	viscosity	viscosity	Minutesto5pointsrise,t5	ASTM D1646	35.1	min
density			1.00	g/cm³
Mooney viscosity	ML1+4,100°C	ASTM D1646	68	MU
Mooney viscosity	Mooney viscosity	ML1+4,100°C2	ASTM D1646	11	MU
bound acrylonitrile content		Internal Method	41.0	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,5Sec4	ASTM D2240	72
	Shore hardness	ShoreA,5Sec5	ASTM D2240	74
	Shore hardness	Shore hardness	ShoreA,5Sec3	ASTM D2240	70
aging	Test Condition	Test Method	Test Result	Test Unit
Change rate of ultimate elongation in air	100°C,70hr	ASTM D573	-20	%
Change rate of hardness (Shore) in the air	ShoreA,100°C,70hr	ASTM D573	4.0
Change rate of tensile strength in air	100°C,70hr,在ASTM#1油中	ASTM D471	-3.0	%
Change rate of tensile strength in air	Change rate of tensile strength in air	100°C,70hr,在IRM903油中	ASTM D471	-8.0	%
Change rate of ultimate elongation in air	100°C,70hr,在ASTM#1油中	ASTM D471	-24	%
Change rate of ultimate elongation in air	Change rate of ultimate elongation in air	100°C,70hr,在IRM903油中	ASTM D471	-14	%
Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在ASTM#1油中	ASTM D471	2.0
Change rate of hardness (Shore) in the air	Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在IRM903油中	ASTM D471	-6.0
Volume change	100°C,70hr,ASTM标准油（1号）	ASTM D471	-1.1	%
Volume change	Volume change	100°C,70hr,在IRM903油中	ASTM D471	9.4	%
Change rate of tensile strength in air	100°C,70hr	ASTM D573	-7.0	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top