ABS Hylac® GP74G5
0
- Properties:Fillerglass fiber reinforced material50%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.06 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 2.0 g/10min | |
| Shrinkage rate | ISO 294-4 | 0.20to0.40 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Break | ISO 527-2 | 48.0 MPa |
| Tensile strain | Break | ISO 527-2 | 5.0 % |
| Flexural modulus | ISO 178 | 2800 MPa | |
| bending strength | ISO 178 | 80.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 10 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 95.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top