Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTMD955 | 0.25 % |
| Shrinkage rate | | ASTMD955 | 1.1 % |
| Water absorption rate | | ASTMD570 | 0.020 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 100 |
| Rockwell hardness | | ASTMD785 | 121 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTMD790 | 270 Mpa |
| compressive strength | | ASTMD695 | 200 Mpa |
| Poisson's ratio | | | 0.36 |
| Friction coefficient 3 | | ASTMD1894 | 0.35 |
| Friction coefficient 3 | | ASTMD1894 | 0.35 |
| Fracture bending elongation | | ASTMD790 | 2.5 % |
| Tensile modulus | | ASTMD638 | 15000 Mpa |
| tensile strength | | ASTMD638 | 190 Mpa |
| elongation | | ASTMD638 | 1.8 % |
| Flexural modulus | | ASTMD790 | 13500 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD256 | 600 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 16 KV/mm |
| dielectric constant | | ASTMD150 | 4.00 |
| Dissipation Factor | | ASTMD150 | 2E-03 |
| arc resistance | | ASTMD495 | 125 sec |
| CTI | | ASTMD3638 | 170 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD696 | 2.2E-05 cm/cm/°C |
| | ASTMD648 | 265 °C |
| | ASTMD696 | 2.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices