Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| Curing Time | | | 1.0 hr |
| Curing Time | | | 4.0 hr |
| Curing Time | | | 24 hr |
| Curing Time | | | 90 min |
| Color | | | Clear/Transparent |
| Color | | | Red |
| density | | | 0.958 g/cm³ |
| density | | | 2.34 g/cm³ |
| | ASTM D2393 | 1.0 Pa·s |
| | ASTM D2393 | 10 Pa·s |
| | ASTM D2393 | 15 Pa·s |
| Curing Time | | | 0.25 hr |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| | | 100 |
| | | 按重量计算的混合比:5.0 |
| | | 26 wk |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Hardness (Shore) | Shore A | ASTM D2240 | 65 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTM D624 | 2.63 kN/m |
| tensile strength | | ASTM D412 | 3.28 MPa |
| elongation | Break | ASTM D412 | 45 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 5E+14 ohms·cm |
| dielectric strength | | ASTM D149 | 20 kV/mm |
| dielectric constant | | ASTM D150 | 5.00 |
| Dissipation Factor | | ASTM D150 | 5E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | | 1.8E-04 cm/cm/°C |
| thermal conductivity | | | 1.4 W/m/K |
| Usage temperature | | | -55-260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare