PBT 3316 ED3002 JAPAN POLYPLASTIC

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforced

Typical Applications:

Electrical applicationsElectronic and electrical components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical applications \| Electronic and electrical components
Properties:	Glass fiber reinforced

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179/1eA	8.5	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	42	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	59	kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	7.7	kJ/m²
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	8.5	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.38mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	1.5mm	UL 94	5VA
Extreme Oxygen Index		ISO 4589-2	30	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ASTM D638	9650	Mpa
Tensile modulus	Tensile modulus		ISO 527-2/1A/1	10700	Mpa
tensile strength	Break,23°C	ASTM D638	134	Mpa
tensile strength	tensile strength	Break	ISO 527-2/1A/5	135	Mpa
elongation	Break,23°C	ASTM D638	2.5	%
Tensile strain	Break	ISO 527-2/1A/5	2.5	%
Bending modulus	23°C	ISO 178	10300	Mpa
bending strength	23°C	ISO 178	200	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	220	°C
	Hot deformation temperature	0.45MPa,Annealed	ASTM D648	221	°C
		Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	206	°C
			Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	208	°C
			Hot deformation temperature	Hot deformation temperature	8.0MPa,Unannealed	ISO 75-2/C	165	°C
Vicat softening temperature		ISO 306/B50	225	°C
Melting temperature		ASTM D3418	225	°C
Melting temperature	Melting temperature		ISO 11357-3	225	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	2.5E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	7.7E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.16	%
density		ASTM D792	1.66	g/cm³
density	density		ISO 1183	1.66	g/cm³
Melt Volume Flow Rate (MVR)	250°C/2.16kg	ISO 1133	7.00	cm3/10min
Shrinkage rate	MD	ASTM D955	0.30-0.50	%
	Shrinkage rate	TD	ISO 294-4	0.80-1.3	%
	Shrinkage rate	Shrinkage rate	MD	ISO 294-4	0.10-0.80	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1MHz	ASTM D150	3.50
Relative permittivity	100Hz	IEC 60250	3.60
Relative permittivity	Relative permittivity	1MHz	IEC 60250	2.90
Dissipation factor	1MHz	ASTM D150	0.020
	Dissipation factor	100Hz	IEC 60250	3.3E-03
	Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.015
Arc resistance		ASTM D495	106	sec
Compared to the anti leakage trace index		ASTM D3638		V
Compared to the anti leakage trace index	Compared to the anti leakage trace index		IEC 60112		V
Surface resistivity		IEC 60093	1E+15	ohms
Volume resistivity		ASTM D257	2E+16	ohms·cm
Volume resistivity	Volume resistivity		IEC 60093	1E+15	ohms·cm
Dielectric strength		ASTM D149	20	KV/mm
Dielectric strength	Dielectric strength		IEC 60243-1	34	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ISO 2039-2	89

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top