PP C30S
0
- Properties:High liquidity
- Usages:Mainly used for tearing tapes for ropesmonofilamentstwisted filamentsand fibers
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| yellow index | ≤4 | ||
| Chloride content | ≤30 PPm | ||
| Total ash content | ≤200 PPm | ||
| melt mass-flow rate | 3.5-7.5 g/10min | ||
| isotactic index | ≥94.5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| flexural modulus | ≥1400 MPa | ||
| tensile yield strength | ≥30.9 MPa | ||
| Rockwell hardness | ≥92 R标尺 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ≥152 ℃ | ||
| ≥86 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top