PA66 FR50 DUPONT USA

201

Form：Granules | Grade：Enhanced level

Properties:

Flame retardantGlass fiber reinforced

Typical Applications:

Fitness equipmentAutomotive sectorElectrical fieldElectronic fieldElectrical appliances

Supplier(1)

Product Description

Certificates(1)

Datasheet

Alternative(1)

Product Description

Typical Applications:	Fitness equipment \| Automotive sector \| Electrical field \| Electronic field \| Electrical appliances
Properties:	Flame retardant \| Glass fiber reinforced

Certificates

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			注塑级
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr	ASTM D-570	DAM｜0.5	%
Water absorption rate	Water absorption rate	24hr	ASTM D-570	50%RH｜-	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256/ISO 179	100	kg·cm/cm(J/M)ft·lb/in
Elongation at Break		ASTM D638/ISO 527	2.5	%
tensile strength		ASTM D638/ISO 527	169	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	8960	kg·cm/cm(J/M)ft·lb/in
bending strength		ASTM D790/ISO 178	240	kg·cm/cm(J/M)ft·lb/in
Bending modulus		ASTM D-790	DAM｜8960	Mpa
Bending modulus	Bending modulus		ASTM D-790	50%RH｜6900	Mpa
bending strength		ASTM D-790	DAM｜240	Mpa
bending strength	bending strength		ASTM D-790	50%RH｜-	Mpa
elongation	Break	ASTM D-638	DAM｜2.5	%
elongation	elongation	Break	ASTM D-638	50%RH｜4	%
tensile strength		ASTN D-638	DAM｜169	Mpa
tensile strength	tensile strength		ASTN D-638	50%RH｜134	Mpa
Impact strength of cantilever beam gap		ASTM D-256	DAM｜100	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D-256	50%RH｜105	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648/ISO 75	235	℃（℉）
Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	257	℃（℉）
Melting temperature			262	℃（℉）
Melting temperature	Melting temperature		ASTM D-3418	262	°C
Hot deformation temperature	0.45MPa	ASTM D-648	DAM｜257	°C
	Hot deformation temperature	0.45MPa	ASTM D-648	50%RH｜-	°C
		Hot deformation temperature	1.80MPa	ASTM D-648	DAM｜235	°C
		Hot deformation temperature	Hot deformation temperature	1.80MPa	ASTM D-648	50%RH｜-	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.56
Water absorption rate		ASTM D570/ISO 62	0.5	%
Shrinkage rate	3.2mm,flow	ASTM D-792	DAM｜0.4	%
Shrinkage rate	Shrinkage rate	3.2mm,flow	ASTM D-792	50%RH｜-	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257/IEC 60093	10	Ω
Dielectric constant		ASTM D150/IEC 60250	17.2
Dielectric constant	Dielectric constant		ASTM D150/IEC 60250	3.6
Volume resistivity		ASTM D257/IEC 60093	10	Ω.cm
Dielectric strength	3.2mm	ASTM D-149	DAM｜17.2	KV/mm
Dielectric strength	Dielectric strength	3.2mm	ASTM D-149	50%RH｜15.6	KV/mm
Volume resistivity		ASTM D-257	DAM｜1014	Ω.m
Volume resistivity	Volume resistivity		ASTM D-257	50%RH｜1011	Ω.m
Dielectric constant	103Hz	ASTM D-150	DAM｜3.6
Dielectric constant	Dielectric constant	103Hz	ASTM D-150	50%RH｜5.1
Dissipation factor	103Hz	ASTM D-150	DAM｜0.009
Dissipation factor	Dissipation factor	103Hz	ASTM D-150	50%RH｜0.113
Dielectric constant	106Hz	ASTM D-150	DAM｜3.5
Dielectric constant	Dielectric constant	106Hz	ASTM D-150	50%RH｜3.8
Dissipation factor	106Hz	ASTM D-150	DAM｜0.014
Dissipation factor	Dissipation factor	106Hz	ASTM D-150	50%RH｜0.041
Surface resistivity		ASTM D-257	DAM｜1014
Surface resistivity	Surface resistivity		ASTM D-257	50%RH｜1011

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top