TPEE EM630-H DSM HOLAND

Form：Granules | Grade：Enhanced level

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
tear strength		ISO 34-1	180	kN/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Nominal tensile fracture strain		ISO 527-2	> 50	%
Tensile strain	Break	ISO 527-2	> 300	%
Tensile strain	Tensile strain	Yield	ISO 527-2	29	%
tensile strength	300% Strain	ISO 527-2	20.0	Mpa
	tensile strength	100% Strain	ISO 527-2	22.0	Mpa
		tensile strength	50% Strain	ISO 527-2	21.0	Mpa
			tensile strength	10% Strain	ISO 527-2	18.0	Mpa
				tensile strength	5.0% Strain	ISO 527-2	12.5	Mpa
					tensile strength	Break	ISO 527-2	31.5	Mpa
					tensile strength	tensile strength	Yield	ISO 527-2	22.0	Mpa
Tensile modulus		ISO 527-2	280	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	1.9E-4	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Flow	ISO 11359-2	1.9E-4	cm/cm/°C
Melting temperature		ISO 11357-3	212	°C
Vicat softening temperature		ISO 306/B50	125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.20	%
Water absorption rate	Water absorption rate	Saturation, 23°C	ISO 62	0.60	%
Melt Volume Flow Rate (MVR)	230°C/2.16 kg	ISO 1133	4.00	cm3/10min
Apparent density		ISO 60	0.76	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Relative permittivity	1 MHz	IEC 60250	3.40
Dissipation factor	100 Hz	IEC 60250	0.011
Dissipation factor	Dissipation factor	1 MHz	IEC 60250	0.034
Compared to the anti leakage trace index		IEC 60112	PLC 0
Relative permittivity	100 Hz	IEC 60250	3.80
Dielectric strength		IEC 60243-1	22	KV/mm
Volume resistivity		IEC 60093	1.0E+14	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore D, 3 Sec	ISO 868	60

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top