PC 943-701 SABIC INNOVATIVE CHONGQING

Form：Granules | Grade：Fireproof V0

Properties:

Flame retardantMedium viscosity

Typical Applications:

Plastic bagElectrical applicationsAutomotive External PartsLighting applicationselectrical equipmentPlastic barrel

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Plastic bag \| Electrical applications \| Automotive External Parts \| Lighting applications \| electrical equipment \| Plastic barrel
Properties:	Flame retardant \| Medium viscosity

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D1822	525	kJ/m²
Dart impact	23°C	ASTM D3029	169	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-0
Extreme Oxygen Index		ASTM D2863	35	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	1000Cycles,1000g,CS-17Wheel	ASTM D1044	10.0	mg
bending strength	Yield,50.0mmSpan	ASTM D790	91.0	Mpa
Bending modulus	50.0mmSpan	ASTM D790	2240	Mpa
elongation	Break	ASTM D638	90	%
elongation	elongation	Yield	ASTM D638	7.0	%
tensile strength	Break	ASTM D638	55.8	Mpa
tensile strength	tensile strength	Yield	ASTM D638	62.1	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Str		UL 746	130	°C
RTI Imp		UL 746	120	°C
RTI Elec		UL 746	130	°C
thermal conductivity		ASTMC177	0.19	W/m/K
Linear coefficient of thermal expansion	MD：-40to95°C	ASTME831	6.8E-05	cm/cm/°C
Vicat softening temperature		ASTM D15255	152	°C
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	132	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTM D648	138	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Outdoor applicability		UL 746C	f1
Water absorption rate	Equilibrium,100°C	ASTM D570	0.58	%
	Water absorption rate	Equilibrium,23°C	ASTM D570	0.35	%
	Water absorption rate	Water absorption rate	24hr	ASTM D570	0.15	%
Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
melt mass-flow rate	300°C/1.2kg	ASTM D1238	10	g/10min
Specific volume		ASTM D792	0.835	cm³/g
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	>1.0E+17	ohms·cm
Dielectric strength	3.20mm,inAir	ASTM D149	17	KV/mm
Dielectric constant	50Hz	ASTM D150	3.01
	Dielectric constant	60Hz	ASTM D150	3.01
	Dielectric constant	Dielectric constant	1MHz	ASTM D150	2.96
Dissipation factor	50Hz	ASTM D150	9E-04
	Dissipation factor	60Hz	ASTM D150	9E-04
	Dissipation factor	Dissipation factor	1MHz	ASTM D150	0.010
Arc resistance		ASTM D495	PLC7
Compared to the anti leakage trace index	CTI	UL 746	PLC 3
High arc combustion index	HAI	UL 746	PLC 2
High voltage arc tracing rate	HVTR	UL 746	PLC 3
Hot wire ignition	HWI	UL 746	PLC 1
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ASTM D785	118
Rockwell hardness	Rockwell hardness	M-Sale	ASTM D785	70

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top