PC/PBT XENOY™ X5300WX-GN
102
- Properties:Chemical resistanceWeather resistance
- Usages:Electronic and electrical components
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 26 g/10min | |
| Melt volume flow rate | ISO 1133 | 25.0 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.70-0.90 % | |
| Water absorption rate | ISO 62 | 0.50 % | |
| ISO 62 | 0.15 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2550 Mpa | |
| ISO 527-2/1 | 2250 Mpa | ||
| tensile strength | ASTM D638 | 62.0 Mpa | |
| bending strength | ASTM D790 | 96.0 Mpa | |
| tensile strength | ISO 527-2/50 | 62.0 Mpa | |
| ASTM D638 | 51.0 Mpa | ||
| ISO 527-2/50 | 51.0 Mpa | ||
| elongation | ASTM D638 | 5.0 % | |
| Tensile strain | ISO 527-2/50 | 5.0 % | |
| elongation | ASTM D638 | 110 % | |
| Tensile strain | ISO 527-2/50 | 110 % | |
| Flexural modulus | ASTM D790 | 2480 Mpa | |
| ISO 178 | 2180 Mpa | ||
| bending strength | ISO 178 | 87.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 45 kJ/m² | |
| Impact strength of cantilever beam gap | ISO 180/1A | 15 kJ/m² | |
| ISO 180/1A | 50 kJ/m² | ||
| Dart impact | ASTM D3763 | 71.0 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Af | 89.0 °C | |
| vicat | ASTM D152510 | 135 °C | |
| ISO 306/B50 | 120 °C | ||
| ISO 306/B120 | 124 °C | ||
| Linear coefficient of thermal expansion | ASTME831 | 7E-05 cm/cm/°C | |
| ISO 11359-2 | 7E-05 cm/cm/°C | ||
| ASTME831 | 7.6E-05 cm/cm/°C | ||
| ISO 11359-2 | 7.5E-05 cm/cm/°C | ||
| Heat distortion temperature | ASTM D648 | 101 °C | |
| ASTM D648 | 87.0 °C | ||
| ASTM D648 | 88.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top