PPO WCD801A－BK2C007 SABIC INNOVATIVE JAPAN

Form：Granules | Grade：Injection grade

Properties:

Food grade

Typical Applications:

Electronic and electrical components

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic and electrical components
Properties:	Food grade

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	4.0 mm	UL 94	V-0
Burning wire flammability index	3.0 mm	IEC 60695-2-12	650	°C
Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	750	°C
Extreme Oxygen Index		ISO 4589-2	26	%
Extreme Oxygen Index	Extreme Oxygen Index	VW-11	UL 1581	Pass
Smoke density	Flaming, Ds max : 500.0 μm	ASTM E662	140
Smoke density	Smoke density	Non-Flaming, Ds max : 500.0 μm	ASTM E662	95
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus	--	ISO 178	90.0	Mpa
Bending modulus	Bending modulus	100 mm Span	ASTM D790	80.0	Mpa
elongation	Break	ISO 527-2/50	120	%
	elongation	Break, 113°C5	UL 1581	150	%
		elongation	Break4	ASTM D638	120	%
		elongation	elongation	Break1	UL 1581	210	%
tensile strength	Break	ISO 527-2/50	13.0	Mpa
	tensile strength	Break, 113°C3	UL 1581	17.0	Mpa
		tensile strength	Break2	ASTM D638	12.0	Mpa
		tensile strength	tensile strength	Break1	UL 1581	16.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	100°C	UL 1581	16	%
UL temperature rating		UL 1581	80	°C
Brittle temperature		ASTM D746	< -40.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	250°C/5.0 kg	ASTM D1238	11	g/10 min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index		IEC 60112	PLC 0
Dissipation factor	1 MHz	IEC 60250	4.0E-3
	Dissipation factor	60 Hz	IEC 60250	0.030
	Dissipation factor	Dissipation factor	50 Hz	IEC 60250	0.030
Relative permittivity	1 MHz	IEC 60250	2.80
	Relative permittivity	60 Hz	IEC 60250	2.80
	Relative permittivity	Relative permittivity	50 Hz	IEC 60250	2.80
Dielectric strength	2.00 mm, in Oil	IEC 60243-1	23	KV/mm
Volume resistivity		IEC 60093	3.8E+15	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore A, 30 Sec	ASTM D2240	80

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top