PC GS2020MLR 9525F MITSUBISHI THAILAND

Form：Granules | Grade：Injection grade

Properties:

enhanceFiller: Glass fiber reinf20%Filler by weight

Typical Applications:

Fiber gradeCamera applications

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fiber grade \| Camera applications
Properties:	enhance \| Filler: Glass fiber reinf \| 20% \| Filler by weight

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ASTM D785	124
tensile strength	3.20mm	ASTM D638	106	Mpa
elongation	Break，3.20mm	ASTM D638	4.0	%
Bending modulus	6.40mm	ASTM D790	6350	Mpa
bending strength	6.40mm	ASTM D790	185	Mpa
Impact strength of cantilever beam gap	3.20mm	ASTM D256	140	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.60mm	UL 94	V-2
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	145	°C
Linear coefficient of thermal expansion		ASTM D696	0.000024	cm/cm/℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.33	g/cm³
melt mass-flow rate	300℃/1.2kg	ASTM D1238	10-12	g/10min
Shrinkage rate	MD：3.00mm	ASTM D955	0.20-0.40	%
Water absorption rate	24hr	ASTM D570	0.11	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		ASTM D149	23	KV/mm
Dielectric constant		ASTM D150	3.05

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top