Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTM D792 | 1.38 g/cm³ |
water content | | ASTM D6980 | <0.20 % |
ash content | | ASTM D5630 | 33 % |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
granularity | | | 3.50 g/100pellets |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile strain | Break | ISO 527-2 | 3.0 % |
Flexural modulus | | ISO 178 | 10300 MPa |
bending strength | | ISO 178 | 280 MPa |
Tensile modulus | | ISO 527-2 | 9880 MPa |
tensile strength | Break | ISO 527-2 | 180 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ISO 180/A | 11 kJ/m² |
Suspended wall beam without notch impact strength | | ISO 180 | 60 kJ/m² |
Thermal performance | Test Condition | Test Method | Test Result |
---|
melting temperature | | ASTM D3418 | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.