POM M90 CELANESE NANJING

Form：Granules | Grade：Injection grade

Properties:

high viscositywear resistanttransparentHigh mobilityWeather resistancecurrency

Typical Applications:

Electrical fieldElectronic fieldHousehold appliancesHousehold appliances

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Household appliances \| Household appliances
Properties:	high viscosity \| wear resistant \| transparent \| High mobility \| Weather resistance \| currency

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	4.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	6.0	kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	6.0	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2/1A/1	2650	Mpa
tensile strength	Yield	ISO 527-2/1A/50	64.0	Mpa
Tensile strain	Yield	ISO 527-2/1A/50	9.0	%
Bending modulus	23°C	ISO 178	2450	Mpa
bending strength	23°C	ISO 178	77.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	151	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	91.0	°C
Melting temperature		ISO 11357-3	167	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1.1E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	1.2E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.41	g/cm³
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	8.00	cm3/10min
Shrinkage rate	TD	ISO 294-4	2.4	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	2.5	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top