Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTM D-2457 | 60 |
| other | Test Condition | Test Method | Test Result |
|---|
| notes | | | 薄膜级 |
| | | 薄膜级，滑爽剂和抗粘剂含量高，冲击强度优。 |
| purpose | | | 适用于重型的衬里和重载型装运袋、垃圾袋，能与HDPE和LDPE共混。 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D-792 | 0.918 g/cm³ |
| melt mass-flow rate | | ASTM D-1238 | 1.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation at break | | ASTM D-882 | 750 % |
| elongation at break | | ASTM D-882 | 800 % |
| Elmendorf fracture strength | | ASTM D-1922 | 165 g |
| Elmendorf fracture strength | | ASTM D-1922 | 300 g |
| Puncture Resistance | | SABIC | 68 J/mm |
| 1% secant modulus | | ASTM D-882 | 220 Mpa |
| 1% secant modulus | | ASTM D-882 | 260 Mpa |
| Tensile strength at break | | ASTM D-882 | 40 Mpa |
| Tensile strength at break | | ASTM D-882 | 32 Mpa |
| Dart impact strength | | ASTM D-1709 | 154 g |
| Yield tensile strength | | ASTM D-882 | 11 Mpa |
| Yield tensile strength | | ASTM D-882 | 11.5 Mpa |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| muddy | | ASTM D-1003 | 9.5 % |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 0.918 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices