PPS 1140A6 HD9100 PTM NANTONG

Form：Granules | Grade：Injection grade

Properties:

High hardnessHigh rigidityhigh strengthHigh toughnessHeat agingChemical resistanceSolvent resistantHigh traffic

Typical Applications:

Automotive componentsOffice equipmentElectronic and Electrical ApplicationsConnectorCooling fan

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive components \| Office equipment \| Electronic and Electrical Applications \| Connector \| Cooling fan
Properties:	High hardness \| High rigidity \| high strength \| High toughness \| Heat aging \| Chemical resistance \| Solvent resistant \| High traffic

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	92	J/m
Suspended wall beam without notch impact strength		ASTM D256	353	J/m
tensile strength		ASTM D638	186	MPa
elongation	Break	ASTM D638	1.7	%
Bending modulus		ASTM D790	13700	MPa
bending strength		ASTM D790	240	MPa
Poisson's ratio		ASTM E132	0.4
Friction coefficient	VS.ltself-Dynamic	ASTM D1894	0.44
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	270	℃
Linear coefficient of thermal expansion	Flow	ASTM D696	0.000016	cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂直	ASTM D696	0.00007	cm/cm/℃
UL flame retardant rating		UL 94	V-0
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.67
Water absorption rate	24hr,23℃	ASTM D570	0.015	%
Rockwell hardness	M-Scale	ASTM D785	100
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	8E+16	ohms
Volume resistivity		ASTM D257	1E+16	Ohm.cm
Dielectric strength	3.00mm	ASTM D149	12	kV/mm
Dielectric constant	1000Hz	ASTM D150	4.5
Dielectric constant	Dielectric constant	1E+6Hz	ASTM D150	4.5
Dissipation factor	1000Hz	ASTM D150	0.002
Dissipation factor	Dissipation factor	1E+6Hz	ASTM D150	0.002
Arc resistance		ASTM D495	120	sec

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top