COC APEL™ APL5514ML
796
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.04 | |
| Shrinkage rate | ASTM D955 | 0.60% % | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 36 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze ratio | ISO 14782 | 0.50% % | |
| transmittance | ASTM D1003/ISO 13468 | 90% % | |
| refractive index | ASTM D542/ISO 489 | 1.540 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 10 kg·cm/cm(J/M)ft·lb/in | |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 25 kg·cm/cm(J/M)ft·lb/in | |
| elongation at break | ASTM D638/ISO 527 | 3.0% kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 3200 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 100 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 60 kg/cm²(MPa)[Lb/in²] |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648/ISO 75 | 135 ℃（℉） | |
| ASTM D648/ISO 75 | 125 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top