
PC C6200-111 SABIC INNOVATIVE NANSHA
140
Form:Granules | Grade:Injection grade
Properties:
heat-resistingHigh temperature resistanHigh impact resistanceHigh mobilityFlame retardant
Typical Applications:
Automotive sectorHousehold appliancesElectronic fieldElectrical field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Household appliances | Electronic field | Electrical field |
| Properties: | heat-resisting | High temperature resistan | High impact resistance | High mobility | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Dart impact | -30°C,EnergyatPeakLoad | ASTM D3763 | 54.2 | J |
| 23°C,EnergyatPeakLoad | ASTM D3763 | 61.0 | J | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 2.0mm | UL 94 | 5VB | |
| 3.4mm | UL 94 | 5VA | ||
| 0.71mm | UL 94 | HB | ||
| 1.2mm | UL 94 | V-1 | ||
| 1.5mm | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break | ASTM D638 | 50 | % |
| Bending modulus | 100mmSpan | ASTM D790 | 2690 | Mpa |
| bending strength | Yield,100mmSpan | ASTM D790 | 103 | Mpa |
| tensile strength | Yield | ASTM D638 | 66.9 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| RTI Str | UL 746 | 85.0 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | 87.8 | °C |
| 1.8MPa,Unannealed,6.40mm | ASTM D648 | 90.6 | °C | |
| RTI Elec | UL 746 | 85.0 | °C | |
| RTI Imp | UL 746 | 85.0 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 260°C/2.16kg | ASTM D1238 | 15 | g/10min |
| Spiral flow length | Internal Method | 68.6 | CM | |
| Shrinkage rate | MD:3.20mm | Internal Method | 0.40-0.60 | % |
| TD:3.20mm | Internal Method | 0.40-0.60 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | IEC 60093 | >1.0E+15 | ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 | ohms·cm | |
| Dielectric strength | 0.800mm,in Oil | IEC 60243-1 | 35 | KV/mm |
| 1.60mm,in Oil | IEC 60243-1 | 25 | KV/mm | |
| 3.20mm,in Oil | IEC 60243-1 | 17 | KV/mm | |
| Relative permittivity | 50Hz | IEC 60250 | 2.80 | |
| 60Hz | IEC 60250 | 2.80 | ||
| 1MHz | IEC 60250 | 2.70 | ||
| Dissipation factor | 50Hz | IEC 60250 | 4E-03 | |
| 60Hz | IEC 60250 | 4E-03 | ||
| 1MHz | IEC 60250 | 8E-03 | ||
| Arc resistance | ASTM D495 | PLC6 | ||
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 2 | |
| High arc combustion index | HAI | UL 746 | PLC 0 | |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 3 | |
| Hot wire ignition | HWI | UL 746 | PLC 2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.