PA66 EPR24
47
- Properties:Low viscosityWith lightLow viscosity products
- Usages:Thin walled productsBase material for molding thin or large surface ar
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| relative viscosity | QB | 2.37±0.03 | |
| Impurities and color particles | QB | ≤0.017 % | |
| water content | GB12006.2-89 | ≤2000 ppm | |
| melt mass-flow rate | ISO 1133 | 12.4 g/10min |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 有光、低粘度产品 | ||
| purpose | 用于模制薄型制品或大表面积制品的基料 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 1.4 GPa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 6.0 kJ/m² | |
| ISO 179/1eU | 不断 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 5.1 kJ/m² | |
| Tensile modulus | ISO 527 | 1.6 GPa | |
| tensile strength | ISO 527 | 75.7 Mpa | |
| elongation at break | ISO 527 | 17.0 % | |
| bending strength | ISO 178 | 58.5 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696 | 7.5 10-5k | |
| Heat distortion temperature | ISO 75 | 70 °C | |
| melting temperature | ISO 3146 | 230-252 °C | |
| UL flame retardant rating | UL 94 | V-2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top