
PBT 751SA E3002 JAPAN POLYPLASTIC
90
Form:Granules | Grade:Enhanced level
Properties:
Low warpageFlame retardantwear resistantlow densityGlass fiber reinforcedLow warpageFiller: Glass fiber glass30%GFLow Specific Gravity30%Filler by weight
Typical Applications:
Electrical applicationsElectronic and electrical components
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical applications | Electronic and electrical components |
| Properties: | Low warpage | Flame retardant | wear resistant | low density | Glass fiber reinforced | Low warpage | Filler: Glass fiber glass | 30%GF | Low Specific Gravity | 30% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ISO 178 | 149 | Mpa | |
| Bending modulus | ISO 178 | 8680 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 1.8 | % |
| tensile strength | ISO 527-2 | 99.0 | Mpa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 4.6 | KJ/m | |
| Bending modulus | ISO 178 | 8680 | Mpa | |
| bending strength | ISO 178 | 149 | Mpa | |
| tensile strength | ISO 527-1/-2 | 99 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 6 | |
| Flow | ISO 11359-2 | 3 | ||
| Hot deformation temperature | 1.8Mpa | ISO 75-1/-2 | 190 | °C |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 3E-05 | cm/cm/°C |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 190 | °C |
| Linear coefficient of thermal expansion | TD:23to55°C | Internal Method | 6E-05 | cm/cm/°C |
| UL flame retardant rating | UL 94 | V-0 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.00mm | IEC 60243-1 | 19 | KV/mm |
| Volume resistivity | IEC 60093 | 7E+16 | ohms·cm | |
| Surface resistivity | IEC 60093 | 9×10 | Ω | |
| Volume resistivity | IEC 60093 | 7×10 | Ω.cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Scale | ISO 2039-2 | 80 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| ColourNumber | EF2001/ED3002 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.