PLA REVODE190
39
- Properties:High melting point
- Usages:Extrusion blow moldingSpinningHigh end modified base material
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 内部方法 | 1.20 - 1.30 g/cm³ | |
| melt mass-flow rate | 内部方法 | 2.0 to 10 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 内部方法 | > 50.0 Mpa | |
| Tensile strain | 内部方法 | > 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | 内部方法 | 3.0 to 5.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | 内部方法 | 60.0 to 63.0 °C | |
| melting temperature | 内部方法 | 170 to 180 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top