PBT 301-G0F

Properties:
Injection molding and extrusion grade
flame retardant non reinforced material
this product has the characteristics of fast molding cycle
good fluidity
flame retardant and non precipitation
especially suitable for flexible products such as lighting products and household appliances
and meets the environmental requirements of the European Union
Usages:
Suitable for lighting products
household appliances
etc
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO1183	1.42 g/cm³
Water absorption rate	ISO 62	0.15 %
Shrinkage rate	ISO 294-4	1.5-2.0 %

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ISO 527	55 MPa
elongation	Break	ISO 527	21 %
bending strength		ISO 178	85 MPa
Flexural modulus		ISO 178	2400 MPa
Notch impact strength		ISO 179(1eA)	5 KJ/m²

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant		IEC 60250	2.9

	Test Condition	Test Method	Test Result
Flame retardancy		UL94	HB

Thermal performance	Test Condition	Test Method	Test Result
		ISO 75f	62 ℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top