HIPS HP-700
0
- Properties:High impact strengthgood heat resistance
- Usages:Suitable for injection moldingTV or radio casingsequipment partstoysetc
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.05 | |
| Shrinkage forming | ASTM D-955 | 0.005 cm/cm |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption | ASTM D-570 | 0.06 % | |
| melt mass-flow rate | ASTM D-1238 | 4.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Solid forming hardness | ASTM D-785 | L-70 L,M-Scale | |
| IZOD impact strength | ASTM D-256 | 9.5 kg.cm/cm | |
| Bending coefficient | ASTM D-790 | 2.0×10 Kg/cm | |
| bending strength | ASTM D-790 | 400 Kg/cm | |
| ductility | ASTM D-638 | 37 % | |
| tensile strength | ASTM D-638 | 400 Kg/cm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Diefectic constant | ASTM D-150 | 2.6 | |
| ASTM D-150 | 0.0005 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flammable | HB UL 94 | ||
| Wei's softening temperature | ASTM D-1525 | 108 ℃ | |
| Unannealed | ASTM D-648 | 85 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top