
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| gloss | 20°,50.0μm,Blown Film | ASTM D2457 | >50 | |
| 60°,50.0μm,Blown Film | ASTM D2457 | >100 | ||
| turbidity | 50.0μm,Blown Film | ASTM D1003 | <9.0 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Friction coefficient | ISO 8295 | <0.20 | ||
| Tensile modulus | ISO 527-2 | 260 | Mpa | |
| tensile strength | Yield | ISO 527-2 | 11.0 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ISO 306/A50 | 94.0 | °C | |
| Melting temperature | ISO 3146 | 111 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 1.9 | g/10min |
| film | Test Condition | Test Method | Test Result | Test Unit |
| film thickness | 50 | µm | ||
| 20-60µm | ||||
| tensile strength | MD:50μm,Blown Film | ISO 527-3 | 25.0 | Mpa |
| TD:50μm,Blown Film | ISO 527-3 | 21.0 | Mpa | |
| elongation | MD:Break,50μm,Blown Film | ISO 527-3 | 250 | % |
| TD:Break,50μm,Blown Film | ISO 527-3 | 600 | % | |
| Dart impact | 50μm,Blown Film | ASTM D1709 | 110 | g |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Akutanamide content | DIN 51454 | 0.050 | % | |
| Failure energy | 50.0μm | DIN 53373 | 40.0 | J/cm |
| Silicon dioxide (SiO?) content | ISO 3451-1 | 0.10 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.