ABS Sicoflex S209

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityISO 11831.18 g/cm³
melt mass-flow rateISO 113310 g/10min
Shrinkage rateISO 25770.30to0.50 %
flammabilityTest ConditionTest MethodTest Result
Hot filament ignition temperatureIEC 60695-2-13750 °C
UL flame retardant rating内部方法V-0
UL flame retardant rating内部方法V-0
Burning wire flammability indexIEC 60695-2-12960 °C
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength YieldISO 527-240.0 MPa
tensile strength BreakISO 527-235.0 MPa
Tensile strainBreakISO 527-220 %
Flexural modulusISO 1782500 MPa
Impact resistanceTest ConditionTest MethodTest Result
Impact strength of cantilever beam gapISO 180/1A5.0 kJ/m²
Impact strength of cantilever beam gapISO 180/1A13 kJ/m²
Electrical performanceTest ConditionTest MethodTest Result
Surface ResistivityIEC 600931E+14 ohms
Volume resistivityIEC 600931E+13 ohms·cm
dielectric strengthIEC 60243-130 kV/mm
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 1
Thermal performanceTest ConditionTest MethodTest Result
vicatISO 306/A50102 °C
vicatISO 306/B5093.0 °C
vicatPass
Heat distortion temperatureISO 75-2/A90.0 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top