PA46 HFX31S DSM HOLAND

Form：Granules | Grade：Injection grade

Properties:

Thermal stabilityFlame retardant

Typical Applications:

Fitness equipmentHome appliance components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fitness equipment \| Home appliance components
Properties:	Thermal stability \| Flame retardant

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	49	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	V-0
Flammability level	Flammability level		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	7500	Mpa
tensile strength	Break	ISO 527-2	120	Mpa
Tensile strain	Break	ISO 527-2	2.9	%
Bending modulus		ISO 178	7500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	285	°C
Melting temperature		ISO 11357-3	295	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.5E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	6.5E-5	cm/cm/°C
RTI Elec	0.200 mm	UL 746	120	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	1.3	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.80	%
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.8	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	> 1.0E+15	ohms·cm
Dielectric strength		IEC 60243-1	33	KV/mm
Relative permittivity	1.00 GHz	IEC 60250	3.60
Relative permittivity	Relative permittivity	10.0 GHz	IEC 60250	3.60
Compared to the anti leakage trace index		IEC 60112		V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top