
POM CF702 KOLON KOREA
154
Form:Granules
Properties:
ConductivityHigh rigidityfillerCarbon fiber reinforced m
Typical Applications:
Fitness equipmentThin walled productsPrecision instrumentsWear resistant accessoriesOffice suppliesElectronic accessoriesIndustrial machinery
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Fitness equipment | Thin walled products | Precision instruments | Wear resistant accessories | Office supplies | Electronic accessories | Industrial machinery |
| Properties: | Conductivity | High rigidity | filler | Carbon fiber reinforced m |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Scale | ASTM D785 | 87 | |
| Water absorption rate | Equilibrium,23℃,60%rh | ASTM D570 | 0.22 | % |
| Shrinkage rate | flow | ASTM D955 | 0.90 | % |
| density | ASTM D792 | 1.43 | g/cm³ | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | 47.0 | J/m |
| elongation | Yield,23℃ | ASTM D638 | 4.0 | % |
| tensile strength | Yield,23℃ | ASTM D638 | 80.0 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | flow | ASTM D696 | 0.000060 | cm/cm/°C |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 160 | °C |
| 0.45MPa,Unannealed | ASTM D648 | 164 | °C | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257 | 1E+06 | ohm·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.