PLA Ingeo™ 4032D
368
- Properties:Thermal stabilityHigh mobilitystandardUpdatable resourcesOil resistantBiodegradableFood contact compliance
- Usages:chipLaminate
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| MediumDensity | 1.08 g/cm³ | ||
| melt mass-flow rate | ASTM D1238 | 7.0 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D2457 | 90 | |
| Haze ratio | ASTM D1003 | 2.1 % |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Spencer Impact | 2.50 J | ||
| film thickness | 25 µm | ||
| Secant modulus | ASTM D882 | 3450 Mpa | |
| ASTM D882 | 3790 Mpa | ||
| tensile strength | ASTM D882 | 103 Mpa | |
| ASTM D882 | 145 Mpa | ||
| elongation | ASTM D882 | 180 % | |
| Tensile strain | ASTM D882 | 100 % | |
| Elmendorf tear strength | ASTM D1922 | 17 g | |
| ASTM D1922 | 14 g | ||
| Carbon dioxide transmittance | 内部方法 | 2850 cm³/m²/24hr | |
| OTr | ASTM D1434 | 675 cm³/m²/24hr | |
| Water Vapor Transmission Rate | ASTMF1249 | 380 g·mm/m²/atm/24hr |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Crystallization peak temperature | ASTM D3418 | 155to170 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top