Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM | 2.0-2.4 % |
| other | Test Condition | Test Method | Test Result |
|---|
| notes | | | 阻燃级、耐水、耐候 |
| characteristic | | | 用于圣诞灯装饰品、汽车及家电产品阻燃要求 |
| Color | | | 本白 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 10 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D790/ISO 178 | 28000 kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTM D-638 | 320 kg/cm2 |
| Flexural modulus | | ASTM D-790 | 13000 kg/cm2 |
| Impact strength of cantilever beam gap | | ASTM D-256 | 8 Kg./cm/cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.2 |
| Shrinkage rate | | ASTM D955 | 0.7-1.3 % |
| melt mass-flow rate | | ASTM D1238/ISO 1133 | 10 g/10min |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D-149 | 40 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Combustibility (rate) | | UL 94 | V-0 |
| Heat distortion temperature | | ASTM D648/ISO 75 | 135 ℃（℉） |
| Heat distortion temperature | | ASTM D-648 | 105 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices