Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.15to1.17 g/cm³ |
| Water absorption rate | | ASTM D570 | 0.50to0.60 % |
| Water absorption rate | Saturation | ASTM D570 | 5.0-6.0 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTM D785 | 115to125 |
| Shore hardness | | ASTM D2240 | 78to83 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 37to48 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 3340to3790 MPa |
| tensile strength | | ASTM D638 | 82.7to93.1 MPa |
| elongation | Break | ASTM D638 | 20to30 % |
| Flexural modulus | | ASTM D790 | 2900to3450 MPa |
| bending strength | | ASTM D790 | 103to121 MPa |
| Compression Modulus | | ASTM D695 | 2070to2410 MPa |
| compressive strength | | ASTM D695 | 107to124 MPa |
| shear strength | | ASTM D732 | 68.9to75.8 MPa |
| coefficient of friction | Itself - Dynamic | ASTM D1894 | 0.22 |
| Heat distortion temperature | | ASTM D621 | 0.500to2.50 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 20to24 kV/mm |
| dielectric constant | | ASTM D150 | 3.70 |
| dielectric constant | | ASTM D150 | 3.70 |
| dielectric constant | | ASTM D150 | 3.70 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 204to221 °C |
| Heat distortion temperature | | ASTM D648 | 93.3to204 °C |
| Continuous use temperature | | ASTM D794 | 121 °C |
| melting temperature | | | 227to238 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 9E-05 cm/cm/°C |
| Usage temperature | | | 166 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare