Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate - flow | | | 0.40 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 118 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 10200 Mpa |
| tensile strength | | ASTM D638, ISO 527-2 | 145 Mpa |
| tensile strength | | ISO 527-2 | 211 Mpa |
| tensile strength | | ISO 527-2 | 54.0 Mpa |
| tensile strength | | ISO 527-2 | 42.0 Mpa |
| elongation | | ASTM D638, ISO 527-2 | 3.0 % |
| elongation | | ISO 527-2 | 2.3 % |
| elongation | | ISO 527-2 | 4.0 % |
| elongation | | ISO 527-2 | 4.0 % |
| Flexural modulus | | ASTM D790 | 8760 Mpa |
| Flexural modulus | | ISO 178 | 8250 Mpa |
| bending strength | | ASTM D790 | 230 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | > 1.0E+13 ohms·cm |
| Volume resistivity | | IEC 60093 | > 1.0E+13 ohms·cm |
| injection | Test Condition | Test Method | Test Result |
|---|
| drying temperature | | | 120 °C |
| drying time | | | 2.0 到 4.0 hr |
| Suggested maximum moisture content | | | 0.020 % |
| Processing (melt) temperature | | | 280 到 300 °C |
| Temperature | | | 100 到 110 °C |
| Injection Pressure | | | 3.50 到 12.5 Mpa |
| injection speed | | | 快速 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Thermal deformation temperature under load | | ASTM D648 | 235 °C |
| Thermal deformation temperature under load | | ISO 75-2/B | 240 °C |
| Thermal deformation temperature under load | | ASTM D648 | 215 °C |
| Thermal deformation temperature under load | | ISO 75-2/A | 210 °C |
| | ASTM D3418, ISO 3146 | 245 °C |
| | ASTM E831 | 2.3E-5 cm/cm/°C |
| RTI Elec | | UL 746 | 140 °C |
| RTI Elec | | UL 746 | 140 °C |
| RTI Elec | | UL 746 | 140 °C |
| RTI Imp | | UL 746 | 140 °C |
| RTI Imp | | UL 746 | 140 °C |
| RTI Imp | | UL 746 | 140 °C |
| RTI | | UL 746 | 140 °C |
| RTI | | UL 746 | 140 °C |
| RTI | | UL 746 | 140 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare