ABS/PMMA MG8000SR BK1B088 SABIC INNOVATIVE US

Form：Granules | Grade：Injection grade

Properties:

High rigidityScratch resistance

Typical Applications:

Automotive sectorElectrical componentsBottle capHome appliance componentsFitness equipment

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electrical components \| Bottle cap \| Home appliance components \| Fitness equipment
Properties:	High rigidity \| Scratch resistance

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	220℃/10.0kg	ASTM D-1238	25	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-30℃	ISO 179/1eA	8.00	KJ/m
	Impact strength of cantilever beam gap	23℃	179/1eA	13.0	KJ/m
		Impact strength of cantilever beam gap	-30℃	ASTM D-256	60.0	J/m
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ASTM D-256	80.0	J/m
Shore hardness		ASTM D-2240	78
Tensile modulus		ASTM D-638	2650	Mpa
tensile strength	Yield	ASTM D-638	51.0	Mpa
tensile strength	tensile strength	Break	ASTM D-638	34.0	Mpa
elongation at yield		ASTM D-638	2.8	%
Elongation at Break		ASTM D-638	10	%
Bending modulus	50.0mm Span	ASTM D-790	2600	Mpa
bending strength	50.0mm Span，Yield	ASTM D-790	77.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPa，Unannealed，3.20mm	ASTM D-648	83.0	°C
Vicat softening temperature		ASTM D-1525	89.0	°C
Linear coefficient of thermal expansion	Flow,-40TO40℃	ASTM E-831	0.000087	cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Transverse,-40TO40℃	ASTM E-831	0.000085	cm/cm/℃
Combustibility	1.50mm	UL 94	HB
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	Flow,3.20mm	ASTM D-955	0.40-0.70	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top