PA6 Nycast Nyloil-MDX Cast Nylons Ltd.
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | Saturation | ASTM D570 | 2.0to2.5 % |
| ASTM D570 | 110 MPa | ||
| density | ASTM D792 | 1.14to1.15 g/cm³ | |
| Water absorption rate | ASTM D570 | 0.50to0.60 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 100to115 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2930to3280 MPa | |
| tensile strength | ASTM D638 | 72.4to75.8 MPa | |
| elongation | Break | ASTM D638 | 35to45 % |
| Flexural modulus | ASTM D790 | 2930to3280 MPa | |
| bending strength | ASTM D790 | 107to110 MPa | |
| Compression Modulus | ASTM D695 | 2240to2590 MPa | |
| compressive strength | ASTM D695 | 93.1to96.5 MPa | |
| shear strength | ASTM D732 | 55.2to62.1 MPa | |
| coefficient of friction | Itself - Dynamic | ASTM D1894 | 0.12 |
| Heat distortion temperature | ASTM D621 | 0.700to0.800 % | |
| Wear factor | 4.00 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 75to96 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 93.3to204 °C | |
| Continuous use temperature | ASTM D794 | 110 °C | |
| melting temperature | 227to238 °C | ||
| Linear coefficient of thermal expansion | ASTM D696 | 9E-05 cm/cm/°C | |
| Usage temperature | 166 °C | ||
| Heat distortion temperature | ASTM D648 | 204to221 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top