PP HP5105R OPP OMAN

Form：Granules | Grade：Injection grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	110	kJ/m²
23°C	简支梁Unnotched冲击强度	ISO 179/1eU	110	kJ/m²
23°C	23°C	简支梁Notched冲击强度	ISO 179/1eA	2.5	kJ/m²
squeeze out	Test Condition	Test Method	Test Result	Test Unit
Temperature in Zone 4 of the material cylinder			210 to 240	°C
Temperature in Zone 3 of the material cylinder			210 to 240	°C
Temperature in Zone 2 of the material cylinder			210 to 240	°C
Temperature in Zone 1 of the material cylinder			210 to 240	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Break		> 50	%
Tensile strain	Tensile strain	Yield		8	%
tensile strength	Yield	ISO 527-2/50	35	Mpa
Tensile modulus		ISO 527-1/1	1500	Mpa
crack	拉伸Strain		> 50	%
yield	拉伸Strain		8	%
yield	yield	拉伸应力	ISO 527-2/50	35	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	85	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230°C/2.16 kg	ISO 1133	24	g/10 min
230°C/2.16 kg	熔流率（熔体Flow速率）	ISO 1133	24	g/10 min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top