PC+ABS Generic ABS+PC - Stainless Steel Fiber

Properties:
Filler
stainless steel fiber
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Water absorption rate		ASTMD570	0.10 %
density		ASTMD792	1.21到1.40 g/cm³
density	density		ISO1183	1.21到1.34 g/cm³
Shrinkage rate		ASTMD955	0.29到0.61 %
Shrinkage rate	Shrinkage rate		ISO294-4	0.30到0.55 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTMD638	2620到3460 MPa
tensile strength		ASTMD638	58.2到63.3 MPa
elongation		ASTMD638	1.5到7.9 %
	elongation		ASTMD638	4.6到6.5 %
	elongation	elongation		ISO527-2	5.9到6.1 %
bending strength		ASTMD790	87.6到122 MPa
bending strength	bending strength		ISO178	75.0到86.3 MPa
Flexural modulus		ASTMD790	2560到3650 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	43到84 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180	5.0到9.6 kJ/m²
Suspended wall beam without notch impact strength		ASTMD256	210到1100 J/m
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength		ISO180	31到32 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTMD257	2.0到1.0E+6 ohms
Volume resistivity		ASTMD257	5.5到1.3E+7 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTMD648	95.4到110 °C
Heat distortion temperature	Heat distortion temperature		ISO75-2/A	90.0到104 °C
		ISO11359-2	5.8E-5到6.0E-5 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top